OxyTurbo Twin Gauge Regulator for use with Disposable Argon & CO2 Cylinders (225200)
The OxyTurbo Twin Gauge Regulator is designed for safe, accurate control of disposable Argon, CO₂, and Argon/CO₂ gas cylinders. Featuring dual gauges and a 4mm push-fit hose connector, it’s ideal for light-duty welding, brazing, and shielding gas applications.
Regulator for use with Disposable Argon, CO2 & Argon/CO2 Cylinders.
Ensure precise gas flow and pressure control with the OxyTurbo Twin Gauge Regulator, specifically engineered for use with disposable Argon, CO₂, and Argon/CO₂ gas cylinders. Whether you're MIG welding, TIG welding, or carrying out small-scale brazing tasks, this compact and reliable regulator delivers safe and consistent performance. Designed for ease of use in hobbyist, professional, and workshop environments, it's a must-have for portable welding setups.
Features:
- Compatible with disposable Argon, CO₂, and Argon/CO₂ gas bottles
- Twin gauges for clear monitoring of cylinder contents and outlet pressure
- 4mm push-fit hose connector for quick and easy setup
- Built-in relief valve for safe pressure venting
- Compact and lightweight design for easy handling
- Optional adaptor available (see related products)
Technical Data:
- Inlet Pressure: 150 bar
- Outlet Pressure Range: 0–6 bar
- Standard Delivery Flow Rate: <1m³/h
- Connection: M10x1Rh
- Gas Compatibility: Argon, CO₂, Argon/CO₂ (disposable cylinders only)
The OxyTurbo Twin Gauge Regulator is an essential accessory for anyone using disposable shielding gas cylinders in welding or brazing applications. With its accurate dual-gauge system, safety-focused design, and easy hose connectivity, it offers reliable gas control every time.
| Brand | Oxyturbo |
|---|
You may need a hose adaptor if:
- Your machine uses a 6mm diameter hose (this regulator is designed for 4mm hoses), or
- Your machine does not come with a hose.
Check your setup before purchase to ensure compatibility.
Insert the pin on the base of the regulator into the disposable cylinder and turn it clockwise. You’ll hear a brief burst of gas - this is normal. Continue turning clockwise until the gas sound stops. Hand tightening is sufficient; do not use tools to overtighten.
Turn the black control knob on top of the regulator clockwise until you feel resistance, which indicates the cylinder valve is open. Then, continue adjusting the knob to set your desired working pressure. It’s normal for the knob to feel slightly loose - avoid overtightening, as this can cause damage.
Rotate the black control knob on top of the regulator anticlockwise until it is fully closed. Unscrew the regulator from the disposable cylinder by turning it anticlockwise. Store the regulator in a clean, dry place to prevent damage or contamination.
Tip: Never leave the regulator pressurised when not in use, as this can reduce its lifespan.
When using our disposable cylinders, a full bottle typically reads around 100 bar on the gauge. Readings may vary slightly due to temperature changes.
The contents gauge shows how much gas is left. When it reaches the lower end, it’s time to replace your cylinder.
- Cylinder Contents Gauge (Left): Indicates how much gas is left in the cylinder.
- Outlet Pressure Gauge (Right): Shows the pressure being delivered to your torch or machine.
The red lines indicate the maximum capacity the regulator is designed to handle.
This is the pressure release valve to safely vent excess pressure. It should not be adjusted or tampered with. Altering this valve will void the warranty.
clean water or leak detector spray to suspected areas and look for bubbles or listen for escaping gas. Do not use soapy water as it may react with the gas. If you suspect a leak and the regulator is still within the 3-month warranty period, contact us for advice.
For UK Mainland orders, this product is typically sent via Royal Mail 48hr Tracked. However, you can select a Next Working Day Courier service at checkout if you wish.
Please note: If this item is ordered alongside heavier products, the total weight may move the order into a higher shipping category, in which case Next Working Day Courier will be used.
Orders placed before 3pm will be dispatched the same day Monday - Friday. Orders placed after 3pm on Friday won’t be dispatched until Monday.
For full details, please visit our Delivery Information page.
Send us an email on sales@weldingsuperstore.co.uk as we will be able to get higher quantities for you – the lead time may be increased.
